Overview Spiral bevel gear inverted triangle of safe operation
Spiral bevel gear inverted triangle safe operation:
1. The operator passed an examination to obtain operating permits, are allowed to operate. The operator should be familiar with the machine's performance and structure, and to comply with safety and shift system.
2. Before oiling work should be strictly in accordance with the provisions lubricate and maintain the proper fuel, oil flow, oil standard (windows) eye-catching, oil cup, linoleum and other clean.
3. Check the safety devices, electrical equipment in each operating handle is safe, reliable and flexible, idling about 5min, confirmed intact rear prospective use.
4. After starting the machine, the operator should always pay attention to the ministries functioning sound, temperature, and stop immediately if abnormal lubrication, troubleshooting.
5. The right to adjust the table height, proper installation and adjustment of the tool, so that the top iron knife from the workpiece tooth root 0.1-0.2mm, and tighten fixing, cutting the amount of a reasonable choice, try cutting a tooth found eligible may continue to work, and often check the fastening and tool wear.
6. When processing large helix angle helical cylindrical gears, tooth positioning plate and sub-tooth helix angle braces should be the size of the workpiece and the rotation formulated.
- 2016-05-11> Spiral bevel gear specifications What?
- 2012-11-24> Demand Analysis of gear cutting machines
- 2012-09-19> Spiral bevel gear commutator installation instruct
- 2012-09-11> Overview Spiral bevel gear inverted triangle of sa
- 2012-08-27> Effect of spiral bevel gear carburizing stress rel
- 2012-08-21> Gear special machinery and equipment What advantag
- 2012-08-21> Precision gear really own speed it?
- 2012-08-13> Spiral bevel gear commutator installation instruct
- 2012-08-11> A simple analysis of spiral bevel gear peening int
- 2012-08-03> Rough forging forging temperature suitable for pro