买一套棋牌app需要多少 www.jbqtck.com.cn 當需要改變軸的方向旋轉時，买一套棋牌app需要多少是有用的。它們通常安裝在相隔90度的軸，但可以被設計為工作在其他角度。
螺旋傘齒輪上的齒可以是直鏈，螺旋形或準雙曲面。直齒錐齒輪直齒輪齒實際上有同樣的問題 - 每個齒嚙合，它會影響相應的牙一次。
Bevel gears are useful when the direction of a shaft’s rotation needs to be changed. They are usually mounted on shafts that are 90 degrees apart, but can be designed to work at other angles as well.
The teeth on bevel gears can be straight, spiral or hypoid. Straight bevel gear teeth actually have the same problem as straight spur gear teeth -- as each tooth engages, it impacts the corresponding tooth all at once.
Just like with spur gears, the solution to this problem is to curve the gear teeth. These spiral teeth engage just like helical teeth: the contact starts at one end of the gear and progressively spreads across the whole tooth.
On straight and spiral bevel gears, the shafts must be perpendicular to each other, but they must also be in the same plane. If you were to extend the two shafts past the gears, they would intersect. The hypoid gear, on the other hand, can engage with the axes in different planes.
This feature is used in many car differentials. The ring gear of the differential and the input pinion gear are both hypoid. This allows the input pinion to be mounted lower than the axis of the ring gear. Figure 7 shows the input pinion engaging the ring gear of the differential. Since the driveshaft of the car is connected to the input pinion, this also lowers the driveshaft. This means that the driveshaft doesn’t intrude into the passenger compartment of the car as much, making more room for people and cargo.