买一套棋牌app需要多少 | English | 企業郵箱

國際:國外齒輪論文目錄

2012-10-24 | 瀏覽量: 1023 买一套棋牌app需要多少
文章標簽:1.rar

买一套棋牌app需要多少 www.jbqtck.com.cn AL Kapelevich,非對稱齒輪參數的選擇方法,在動力傳動國際會議(ICPT’2011),十月25日至29號,2011年,西安,中國。西安。中國。它也被出版了的齒輪科技,6月/ 2012年7月,48 - 51。
 
A.L. Kapelevich和V.M.那涅夫,齒輪傳動的密度^大,在第11屆國際ASME動力傳動和資產負債會議提出,2011年8月28日-31日,華盛頓,DC,USA。它也被出版了在齒輪技術,11月/ 2011年12月46 - 52。
 
F.W.布朗,S.R.戴維森,D.B.哈內斯,D.J.and的Weires,AL Kapelevich,分析和測試的齒輪與非對稱漸開線齒形和優化的圓角表格的潛在應用在直升機的主要驅動器,AGMA秋季技術會議,密爾沃基,威斯康星州,2010年10月18日至19日,(10FTM14)。它也被出版了在齒輪技術,6月/ 2011年7月,46 - 55。
 
AL Kapelevich,E.塔耶,自鎖齒輪設計和潛在的應用,AGMA秋季技術會議,密爾沃基,威斯康星州,10月18日至19日,2010年(10FTM17)。它也出版了齒輪解決方案,2012年5月53-58。
 
AL Kapelevich,測量的直接對稱和非對稱齒設計,齒輪,齒輪國際會議,嘉興慕尼黑附近,德國,2010年10月4-6日。它也被出版了在齒輪技術,1月/ 2011年2月60 - 65。
 
AL Kapelevich,的另類設計的速度Increasers,風系統,2010年4月26 - 33。

AL Kapelevich,YV Shekhtman區的存在,在第三次國際會議輸變電’09,卡利地亞,希臘,2009年10月1-2漸開線齒輪。它也被出版了在齒輪技術,1月/ 2010年2月64 - 69。
 
AL Kapelevich,思維的齒輪箱,風電科技(英語和中文),2009年秋季,26 - 31。

AL Kapelevich,TM麥克納馬拉,齒輪,醫療器械,醫療器械設計,月,2009年44-47一種更好的方式來設計。

AL Kapelevich非對稱​​齒輪,直齒輪設計方法及應用,運動和動力傳動裝置,松島,日本,2009年5月13日至15日,在日本機械學會國際會議。它也出版了齒輪解決方案,2011年9月37-51。
 
AL Kapelevich,YV Shekhtman,對稱和非對稱齒齒輪的齒根過渡圓角優化,的AGMA秋季技術會議,圣安東尼奧,德克薩斯州,2008年10月12日至14日,(08FTM06)。它也被刊登在九月/十月2009齒輪技術,73 - 79。
 
VI戈德法布,AL Kapelevich,AA特卡喬夫,先進的方法來優化齒輪設計,齒輪解決方案,2008年8月40-51。

A.S.諾維科夫,A.G. Paikin,V.L. Dorofeyev,V.M.那涅夫,AL Kapelevich,非對稱齒渦輪螺旋槳發動機變速箱齒輪的應用,在第10屆國際ASME動力傳動和資產負債會議,2007年9月4-7日,美國內華達州的拉斯維加斯,。它也被出版了在齒輪技術,1月/ 2008年2月60 - 65。
 
AL Kapelevich,高性能齒輪傳動,在全球動力總成大會2007年6月17-19日,德國柏林,2007年,它也被出版在全球動力總成大會論文集,直接設計方法。 39-42,66-71。它也被出版了在齒輪解決方案,2008年1月,22-31。
 
AL Kapelevich,齒輪傳動設計:打破現狀,機械設計,2007年5月10號,89 - 93。

AL Kapelevich,RE Kleiss,直接的齒輪設計為直齒輪和斜齒輪,齒輪技術,9月/ 2002年10月29 - 35。

AL Kapelevich,YV Shekhtman,直接的齒輪設計:彎曲應力^小化,齒輪技術,9月/ 2003年10月44 - 49。

的AL Kapelevich,幾何和設計的漸開線直齒圓柱齒輪與非對稱的牙齒,機械工程學報,35(2000),117-130。

AL Kapelevich,TM麥克納馬拉,直接齒輪設計用于汽車應用,本文提出了在2005年的SAE世界大會,四月11日至14日,2005年在底特律,MI

AL Kapelevich,直齒輪設計驅動器的性能,齒輪解決方案,2004年1月28,29。

AL Kapelevich,TM麥克納馬拉,直齒輪設計^佳傳動性能,本文提出了中小企業的齒輪加工和制造會議2003年10月6日一起AGMA GEAR EXPO ’03 - 在Columbus,OH
 
問:煉,AL Kapelevich,佛羅里達州利特溫,非對稱修改后的齒輪傳動裝置,減少噪音,定位接觸的嚙合模擬和應力分析,計算機應用力學與工程系,188,363-390(2000)的方法。本文提出了對車間的齒輪研究實驗室,美國伊利諾伊大學芝加哥和克利夫蘭美國宇航局格倫研究中心,5月18日,1999年。
 
RE Kleiss,AL Kapelevich,NJ Kleiss小,新的機遇與模壓齒輪,AGMA秋季技術會議,底特律,2001年10月3-5日,(01FTM9)
 
EB Vulgakov,AL Kapelevich,TV7-117S渦輪螺旋槳發動機,變速箱,(俄羅斯),Vestnik Mashinostroeniya,(11)(2000年),13 - 17。
 
EB Vulgakov,AL Kapelevich,非對稱齒輪傳動:可能的發展,Vestnik Mashinostroeniya(俄羅斯),66(4)(1987年),14 - 16。翻譯成英文,在蘇聯的工程技術研究,6(4)(1987年),2,3。
 
AL Kapelevich,合成的非對稱漸開線齒輪(俄羅斯),Mashinovedenie,(1)(1987)62-67。翻譯成英文在蘇聯機械科學,阿勒頓出版社,(1)(1987),55-59。
 
AL Kapelevich,在引腳非對稱齒齒輪測量(在俄羅斯),Mashinovedenie,(6)(1986):109-110。翻譯成英文在蘇聯機械科學,阿勒頓出版社,(6)(1986),96-97。
 
EB Vulgakov,AL Kapelevich,擴大范圍的漸開線斜齒輪(俄羅斯),Vestnik Mashinostroeniya,62(3)(1982),12 - 14。翻譯成英語蘇聯的工程研究,2(3)(1982年),8,9。
 
EB Vulgakov,AL Kapelevich,區斜齒輪的存在(俄羅斯),Vestnik Mashinostroeniya,60(7)(1980),9 - 11。翻譯成英文在俄羅斯工程學報,60(7)(1980),5 - 7。
 
AL Kapelevich,艾Tolchenov,艾Eidinov,飛刀實驗生產中的應用(俄羅斯),Aviatsionnaya Promyshlennost(航空工業雜志),3,1985年,第39-40。


原文:

A.L. Kapelevich, Asymmetric Gears: Parameter Selection Approach, presented at the International Conference on Power Transmissions (ICPT’2011), October 25 - 29, 2011, Xi’an, China. Xi’an. China. It was also published in Gear Technology, June/July 2012, 48 - 51.

A.L. Kapelevich and V.M. Ananiev, Gear Transmission Density Maximization, presented at the 11th International ASME Power Transmission and Gearing Conference, August 28-31, 2011, Washington, DC, USA. It was also published in Gear Technology, November/December 2011, 46 - 52.

F.W. Brown, S.R. Davidson, D.B. Hanes, D.J. Weires, and A. L. Kapelevich, Analysis and Testing of Gears with Asymmetric Involute Tooth Form and Optimized Fillet Form for Potential Application in Helicopter Main Drives, AGMA Fall Technical Meeting, Milwaukee, Wisconsin, October 18-19, 2010, (10FTM14). It was also published in Gear Technology, June/July 2011, 46 - 55.

A. L. Kapelevich, E. Taye, Self-Locking Gears: Design and Potential Applications, AGMA Fall Technical Meeting, Milwaukee, Wisconsin, October 18-19, 2010, (10FTM17). It was also published in Gear Solutions, May 2012, 53-58.

A. L. Kapelevich, Measurement of directly designed gears with symmetric and asymmetric teeth, International Conference on Gears, Garching near Munich, Germany, October 4-6, 2010. It was also published in Gear Technology, January/February 2011, 60 - 65.

A. L. Kapelevich, An Alternative Design for Speed Increasers, Wind Systems, April 2010, 26 - 33.

A. L. Kapelevich, Y. V. Shekhtman, Area of Existence of Involute Gears, presented at the 3rd International Conference Power Transmission ’09, Kallithea, Greece, 1-2 October 2009. It was also published in Gear Technology, January/February 2010, 64 - 69.

A. L. Kapelevich, Thinking out of the gearbox, Wind Power Technology (in English and Chinese), Autumn 2009, 26 - 31.

A. L. Kapelevich, T. M. McNamara, A better way to design gears for medical devices, Medical Design, March, 2009, 44-47.

A. L. Kapelevich, Direct Gear Design of Asymmetric Gears: Approach and Application, presented at the JSME International Conference on Motion and Power Transmissions, Matsushima, Japan, May 13-15, 2009. It was also published in Gear Solutions, September 2011, 37-51.

A. L. Kapelevich, Y. V. Shekhtman, Tooth Fillet Profile Optimization for Gears with Symmetric and Asymmetric Teeth, AGMA Fall Technical Meeting, San Antonio, Texas, October 12-14, 2008, (08FTM06). It was also published in Gear Technology, September/October 2009, 73 - 79.

V. I. Goldfarb, A. L. Kapelevich, A. A. Tkachev, An Advanced Approach to Optimal Gear Design, Gear Solutions, August 2008, 40-51.

A.S. Novikov, A.G. Paikin, V.L. Dorofeyev, V.M. Ananiev, A.L. Kapelevich, Application of Gears with Asymmetric Teeth in Turboprop Engine Gearbox, presented at the 10th International ASME Power Transmission and Gearing Conference, September 4-7, 2007, Las Vegas, Nevada, USA. It was also published in Gear Technology, January/February 2008, 60 - 65.

A. L. Kapelevich, Direct Design Approach for High Performance Gear Transmissions, presented at the Global Powertrain Congress 2007 June 17-19, 2007, Berlin, Germany and it was also published in the Global Powertrain Congress Proceedings, Vol. 39-42, 66-71. It was also published in Gear Solutions, January 2008, 22-31.

A. L. Kapelevich, Gear Design: Breaking the status quo, Machine Design, May 10th, 2007, 89 - 93.

A. L. Kapelevich, R. E. Kleiss, Direct Gear Design for Spur and Helical Gears, Gear Technology, September/October 2002, 29 - 35.

A. L. Kapelevich, Y. V. Shekhtman, Direct Gear Design: Bending Stress Minimization, Gear Technology, September/October 2003, 44 - 49.

A. L. Kapelevich, Geometry and design of involute spur gears with asymmetric teeth, Mechanism and Machine Theory, 35 (2000), 117-130.

A. L. Kapelevich, T. M. McNamara, Direct Gear Design for Automotive Applications, this paper was presented at the SAE 2005 World Congress, April 11-14, 2005 in Detroit, MI

A. L. Kapelevich, Direct Gear Design Drives Performance, Gear Solutions, January 2004, 28,29.

A. L. Kapelevich, T. M. McNamara, Direct Gear Design for Optimal Gear Performance, this article was presented at SME’s Gear Processing and Manufacturing Conference, October 6, 2003 alongside AGMA’s GEAR EXPO ’03 - in Columbus, OH

F. L. Litvin, Q. Lian, A. L. Kapelevich, Asymmetric modified gear drives: reduction of noise, localization of contact, simulation of meshing and stress analysis, Computer Methods in Applied Mechanics and Engineering, 188 (2000), 363-390. This paper was presented on the workshop of the Gear Research Laboratory of University of Illinois at Chicago and NASA Glenn Research Center, Cleveland, May 18, 1999.

R. E. Kleiss, A. L. Kapelevich, N. J. Kleiss Jr., New Opportunities with Molded gears, AGMA Fall Technical Meeting, Detroit, October 3-5, 2001, (01FTM9)

E. B. Vulgakov, A. L. Kapelevich, The gearbox for the TV7-117S turbo-prop engine (in Russian), Vestnik Mashinostroeniya, (11) (2000), 13 - 17.

E. B. Vulgakov, A. L. Kapelevich, Asymmetric gear transmissions: possible developments (in Russian), Vestnik Mashinostroeniya, 66(4) (1987), 14 - 16. Translated to English in Soviet Engineering Research, 6(4) (1987), 2, 3.

A. L. Kapelevich, Synthesis of asymmetric involute gearing (in Russian), Mashinovedenie, (1) (1987) 62-67. Translated to English in Soviet Machine Science, Allerton Press, (1) (1987), 55-59.

A. L. Kapelevich, Measurement over pins of the gears with asymmetric teeth (in Russian), Mashinovedenie, (6) (1986) 109-110. Translated to English in Soviet Machine Science, Allerton Press, (6) (1986), 96-97.

E. B. Vulgakov, A. L. Kapelevich, Expanding the range of involute helical gearing (in Russian), Vestnik Mashinostroeniya, 62(3) (1982), 12 - 14. Translated to English Soviet Engineering Research, 2(3) (1982), 8,9.

E. B. Vulgakov, A. L. Kapelevich, Area of existence of helical gearing (in Russian), Vestnik Mashinostroeniya, 60(7) (1980), 9 - 11. Translated to English in Russian Engineering Journal, 60(7) (1980), 5 - 7.

A. L. Kapelevich, A. I. Tolchenov, A. I. Eidinov, Application of the fly cutters in experimental production (in Russian), Aviatsionnaya Promyshlennost (Aviation Industry Journal), 3, 1985, 39-40.

相關文章
相關產品
Top